(coreutils.info)tail invocation
5.2 `tail': Output the last part of files
=========================================
`tail' prints the last part (10 lines by default) of each FILE; it
reads from standard input if no files are given or when given a FILE of
`-'. Synopsis:
tail [OPTION]... [FILE]...
If more than one FILE is specified, `tail' prints a one-line header
consisting of:
==> FILE NAME <==
before the output for each FILE.
GNU `tail' can output any amount of data (some other versions of
`tail' cannot). It also has no `-r' option (print in reverse), since
reversing a file is really a different job from printing the end of a
file; BSD `tail' (which is the one with `-r') can only reverse files
that are at most as large as its buffer, which is typically 32 KiB. A
more reliable and versatile way to reverse files is the GNU `tac'
command.
The program accepts the following options. Also see Note: Common
options.
`-c N'
`--bytes=N'
Output the last N bytes, instead of final lines. However, if N
starts with a `+', start printing with the Nth byte from the start
of each file, instead of from the end. N is a number which may
have one of the following multiplicative suffixes:
`b' => 512 ("blocks")
`KB' => 1000 (KiloBytes)
`K' => 1024 (KibiBytes)
`MB' => 1000*1000 (MegaBytes)
`M' => 1024*1024 (MebiBytes)
`GB' => 1000*1000*1000 (GigaBytes)
`G' => 1024*1024*1024 (GibiBytes)
and so on for `T', `P', `E', `Z', and `Y'.
`-f'
`--follow[=HOW]'
Loop forever trying to read more characters at the end of the file,
presumably because the file is growing. If more than one file is
given, `tail' prints a header whenever it gets output from a
different file, to indicate which file that output is from.
There are two ways to specify how you'd like to track files with
this option, but that difference is noticeable only when a
followed file is removed or renamed. If you'd like to continue to
track the end of a growing file even after it has been unlinked,
use `--follow=descriptor'. This is the default behavior, but it
is not useful if you're tracking a log file that may be rotated
(removed or renamed, then reopened). In that case, use
`--follow=name' to track the named file by reopening it
periodically to see if it has been removed and recreated by some
other program.
No matter which method you use, if the tracked file is determined
to have shrunk, `tail' prints a message saying the file has been
truncated and resumes tracking the end of the file from the
newly-determined endpoint.
When a file is removed, `tail''s behavior depends on whether it is
following the name or the descriptor. When following by name,
tail can detect that a file has been removed and gives a message
to that effect, and if `--retry' has been specified it will
continue checking periodically to see if the file reappears. When
following a descriptor, tail does not detect that the file has
been unlinked or renamed and issues no message; even though the
file may no longer be accessible via its original name, it may
still be growing.
The option values `descriptor' and `name' may be specified only
with the long form of the option, not with `-f'.
If `POSIXLY_CORRECT' is set, the `-f' option is ignored if no FILE
operand is specified and standard input is a FIFO or a pipe.
`-F'
This option is the same as `--follow=name --retry'. That is, tail
will attempt to reopen a file when it is removed. Should this
fail, tail will keep trying until it becomes accessible again.
`--retry'
This option is useful mainly when following by name (i.e., with
`--follow=name'). Without this option, when tail encounters a
file that doesn't exist or is otherwise inaccessible, it reports
that fact and never checks it again.
`--sleep-interval=NUMBER'
Change the number of seconds to wait between iterations (the
default is 1.0). During one iteration, every specified file is
checked to see if it has changed size. Historical implementations
of `tail' have required that NUMBER be an integer. However, GNU
`tail' accepts an arbitrary floating point number (using a period
before any fractional digits).
`--pid=PID'
When following by name or by descriptor, you may specify the
process ID, PID, of the sole writer of all FILE arguments. Then,
shortly after that process terminates, tail will also terminate.
This will work properly only if the writer and the tailing process
are running on the same machine. For example, to save the output
of a build in a file and to watch the file grow, if you invoke
`make' and `tail' like this then the tail process will stop when
your build completes. Without this option, you would have had to
kill the `tail -f' process yourself.
$ make >& makerr & tail --pid=$! -f makerr
If you specify a PID that is not in use or that does not correspond
to the process that is writing to the tailed files, then `tail'
may terminate long before any FILEs stop growing or it may not
terminate until long after the real writer has terminated. Note
that `--pid' cannot be supported on some systems; `tail' will
print a warning if this is the case.
`--max-unchanged-stats=N'
When tailing a file by name, if there have been N (default
n=5) consecutive iterations for which the file has not changed,
then `open'/`fstat' the file to determine if that file name is
still associated with the same device/inode-number pair as before.
When following a log file that is rotated, this is approximately
the number of seconds between when tail prints the last
pre-rotation lines and when it prints the lines that have
accumulated in the new log file. This option is meaningful only
when following by name.
`-n N'
`--lines=N'
Output the last N lines. However, if N starts with a `+', start
printing with the Nth line from the start of each file, instead of
from the end. Size multiplier suffixes are the same as with the
`-c' option.
`-q'
`--quiet'
`--silent'
Never print file name headers.
`-v'
`--verbose'
Always print file name headers.
For compatibility `tail' also supports an obsolete usage `tail
-[COUNT][bcl][f] [FILE]', which is recognized only if it does not
conflict with the usage described above. This obsolete form uses
exactly one option and at most one file. In the option, COUNT is an
optional decimal number optionally followed by a size letter (`b', `c',
`l') to mean count by 512-byte blocks, bytes, or lines, optionally
followed by `f' which has the same meaning as `-f'.
On older systems, the leading `-' can be replaced by `+' in the
obsolete option syntax with the same meaning as in counts, and obsolete
usage overrides normal usage when the two conflict. This obsolete
behavior can be enabled or disabled with the `_POSIX2_VERSION'
environment variable (Note: Standards conformance).
Scripts intended for use on standard hosts should avoid obsolete
syntax and should use `-c COUNT[b]', `-n COUNT', and/or `-f' instead.
If your script must also run on hosts that support only the obsolete
syntax, you can often rewrite it to avoid problematic usages, e.g., by
using `sed -n '$p'' rather than `tail -1'. If that's not possible, the
script can use a test like `if tail -c +1 </dev/null >/dev/null 2>&1;
then ...' to decide which syntax to use.
Even if your script assumes the standard behavior, you should still
beware usages whose behaviors differ depending on the POSIX version.
For example, avoid `tail - main.c', since it might be interpreted as
either `tail main.c' or as `tail -- - main.c'; avoid `tail -c 4', since
it might mean either `tail -c4' or `tail -c 10 4'; and avoid `tail +4',
since it might mean either `tail ./+4' or `tail -n +4'.
An exit status of zero indicates success, and a nonzero value
indicates failure.
automatically generated by info2www version 1.2.2.9