Re: multi-level undo & mode line questionns

[lsmithso@xxxxxxxxxxx]

Found it at  https://www.emacspeak.org/VCCS-archive/list.archive.2006/msg00194.html

Lots of beeps now - that's much better. Thanks for all your hel.


Robert D. Crawford writes:
 > The beep is not a function of the speech server, but of the beep
 > package.  Search the archive for more information.  
 > 
 > Best regards,
 > rdc
 > 
 > lsmithso@xxxxxxxxxxx writes:
 > 
 > > It seems my voxin outloud server isn't beeping:
 > >
 > >    (dtk-tone 500 30 'force)
 > >
 > > Produces silence, as does the outloud server command, which also shows the following error message:
 > >
 > >   %t 400 400
 > >   Error: can't read "tts(beep)": no such element in array
 > >
 > > How can I get emacspeak tones working through a sound card?
 > >
 > > T.V. Raman writes:
 > >  > Correct -- since it's inception, emacspeak has conveyed read-only
 > >  > and modified states as follows:
 > >  > 
 > >  > Unmodified writeable buffers -- default -- no explicit auditory
 > >  > cue
 > >  > Modified buffers -- high-pitched beep as the modeline is spoken
 > >  > Read-only buffers -- low-pitched beep as the modeline is spoken.
 > >  > -- 
 > >  > 
 > >  > -- 
 > >  > 
 > >  > 
 > >  > On 5/19/12, Robert D. Crawford <robdcraw@xxxxxxxxxxx> wrote:
 > >  > > Les Smithson <lsmithso@xxxxxxxxxxx> writes:
 > >  > >
 > >  > >> I specificaly meant the buffer modified  status displayed as [*] on
 > >  > >> the mode line. Is there a way to get C-e m to speak its status?
 > >  > >
 > >  > > I didn't search but I can tell you that if you have the beep package
 > >  > > installed there is a beep when you switch to a modified buffer.
 > >  > >
 > >  > > Best regards,
 > >  > > rdc
 > >  > >
 > >  > > --
 > >  > > Robert D. Crawford                                     robdcraw@xxxxxxxxxxx
 > >  > >
 > >  > > -----------------------------------------------------------------------------
 > >  > > To unsubscribe from the emacspeak list or change your address on the
 > >  > > emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
 > >  > > subject of "unsubscribe" or "help".
 > >  > >
 > >  > >
 > >  > 
 > >  > -----------------------------------------------------------------------------
 > >  > To unsubscribe from the emacspeak list or change your address on the
 > >  > emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
 > >  > subject of "unsubscribe" or "help".
 > 
 > -- 
 > Robert D. Crawford                                     robdcraw@xxxxxxxxxxx
 > 
 > -----------------------------------------------------------------------------
 > To unsubscribe from the emacspeak list or change your address on the
 > emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
 > subject of "unsubscribe" or "help".

-- 
Les Smithson

-----------------------------------------------------------------------------
To unsubscribe from the emacspeak list or change your address on the
emacspeak list send mail to "emacspeak-request@xxxxxxxxxxx" with a
subject of "unsubscribe" or "help".