Re: Terminal program

To: Sam Hartman <hartmans@xxxxxxxxxxx>
Subject: Re: Terminal program
From: "T. V. Raman" <raman@xxxxxxxxxxx>
Date: Mon, 3 Mar 1997 09:01:30 -0800
Cc: Nolan J Darilek <ndarilek@xxxxxxxxxxx>, emacspeak@xxxxxxxxxxx
In-Reply-To: <62069522@xxxxxxxxxxx>
References: <Pine.OSF.3.91.970301171553.3766A-100000@xxxxxxxxxxx>
Reply-To: raman@xxxxxxxxxxx

1) I would definitely recommend trying kermit -I know it works happily under
eterm.

2) I don't know why eterm does not bind Esc the way Sam recommends in his
message --personally I dont see any ill effect from doing that. However, I do
manage to send escape to programs like vi running under eterm by hitting Esc
twice.

3) As Sam advised, definitely take some time to learn eterm review mode--
it should take a lot less time than learning a typical dos screenreader and it
will prove worthwhile.

I use eterm all the time when working from home, --I typically set up a ppp
connection to work and rlogin to my sparc at work and  never have trouble
running screen sessions at the remote end.

-- 
Best Regards,
--raman

      Adobe Systems                 Tel: 1 (408) 536 3945   (W14-129)
      Advanced Technology Group     Fax: 1 (408) 537 4042 
      (W14 129) 345 Park Avenue     Email: raman@xxxxxxxxxxx 
      San Jose , CA 95110 -2704     Email:  raman@xxxxxxxxxxx
      http://labrador.corp.adobe.com/~raman/raman.html (Adobe  Internal)
      http://www.cs.cornell.edu/Info/People/raman/raman.html  (Cornell)
-----------------------------------------------------------------------
    Disclaimer: The opinions expressed are my own and in no way should be taken
as representative of my employer, Adobe Systems Inc.
____________________________________________________________

References:
- Terminal program
  - From: Nolan J Darilek <ndarilek@xxxxxxxxxxx>