Re: Speak line commands stopping speech at punctuation marks

["T. V. Raman" <raman@xxxxxxxxxxx>]

That explains it-- the agetty was probably swallowing bytes
the bns server was waiting for.
Jim O'Sullivan writes:
 > Hopefully I have solved this problem now.
 > 
 > I had 'agetty' running on the serial port to which the Braille 'n
 > Speak was connected so that I could use it as a terminal.  I removed
 > this and it seemed to fix the problem.  Although, I was still getting
 > some garbage spoken so I did a warm reset on the bns and, so far,
 > everything is fine.  I have been reading through the emacspeak info
 > pages with no problems.
 > For the record, the steps I took were:
 > 1  Comment out the 'agetty' line in my /etc/inittab file so it reads
 > #s2:12345:respawn:/usr/local/bin/agetty -L -h 9600 ttyS1 vt100
 > 
 > 2  rebooting my system.
 > 
 > Note:  I think using 'init q' will do rather than rebooting.
 > 
 > I also performed a warm reset on the bns by holding down all 7 keys
 > when the unit is powered on.
 > 
 > Once again I am a happy camper!
 > 
 > Jim
 > 
 > -----------------------------------------------------------------------------
 >        To unsubscribe or change your address send mail to
 > "emacspeak-request@xxxxxxxxxxx" with a subject of "unsubscribe" or "help"

-- 
Best Regards,
--raman

      Adobe Systems                 Tel: 1 (408) 536 3945   (W14-612)
      Advanced Technology Group     Fax: 1 (408) 537 4042 
      (W14 129) 345 Park Avenue     Email: raman@xxxxxxxxxxx 
      San Jose , CA 95110 -2704     Email:  raman@xxxxxxxxxxx
      http://labrador.corp.adobe.com/~raman/        (Adobe Intranet)
      http://cs.cornell.edu/home/raman/raman.html    (Cornell)
----------------------------------------------------------------------
    Disclaimer: The opinions expressed are my own and in no way should be taken
as representative of my employer, Adobe Systems Inc.
____________________________________________________________

-----------------------------------------------------------------------------
       To unsubscribe or change your address send mail to
"emacspeak-request@xxxxxxxxxxx" with a subject of "unsubscribe" or "help"